高温可磨耗复合梯度涂层喷涂工艺研究  

Research of the Composite-gradient High Temperature Abradable Sealing Coating

作　　者：王斌利[1] 周莉[1] 黄宝庆 

机构地区：[1]西安航空发动机(集团)有限公司,西安710021

出　　处：《热喷涂技术》2011年第4期22-27,共6页Thermal Spray Technology

摘　　要：按照常压等离子喷涂工艺路线,选择合理的喷涂工艺参数和复合喷涂材料的配比,使用常压等离子喷涂设备在发动机结构件上制备出了高温可磨耗复合梯度封严涂层。对该涂层显微组织、EDS微区成分、涂层组织抗氧化性和涂层氧化增重曲线的测试分析表明,涂层的结构和性能符合相关标准,制备的涂层达到了高温可磨耗封严涂层的使用要求,并已得到实际应用。The composite-gradient high temperature abradable sealing coating was prepared by choosing the right spray parameters and the ratio of composite spray materials on the Atmosphere Plasma Spray （APS） system according to the standard APS routine. The microstructure, the EDS micro-zone chemical composites, the oxidation resistance of coating microstructures and the oxidation weight gains curve of the coating were investigated. The results show that the microstructure and the properties of the coating match the relative standard and meet the requirements of the high temperature abradable sealing, and the coating has been put into practice up to now.

关 键 词：复合梯度涂层 高温可磨耗封严 常压等离子喷涂 

分 类 号：TG174.442[金属学及工艺—金属表面处理]