Fe/C微电解-絮凝沉淀法处理电镀废水中铜的研究  

Treatment of copper from electroplating wastewater by Fe/C micro-electrolysis-flocculation-deposition process

作　　者：彭人勇[1] 程宝珍[1] 

机构地区：[1]青岛科技大学环境与安全工程学院,青岛266042

出　　处：《环境工程学报》2012年第2期501-504,共4页Chinese Journal of Environmental Engineering

基　　金：山东省自然科学基金资助项目(2009ZRB019KH)

摘　　要：利用Fe/C微电解-絮凝沉淀法去除青岛某电子有限公司电镀废水中Cu2+。通过正交与单因素实验,考察了废水初始pH,Fe/C,Fe投加量,反应时间对Cu2+处理效果的影响。实验结果表明:在初始pH=4、Fe/C(质量)=2/1、Fe投加量=60 g/L、反应时间=60 min的实验条件下,絮凝出水Cu2+含量由641.78 mg/L降至0.32 mg/L,还原率高达99.95%,同时COD去除率23.57%。出水Cu2+含量达到山东省半岛流域水污染物综合排放Ⅰ级标准。Iron-carbon micro-electrolysis-flocculating deposition was applied in the treatment of electroplating wastewater containing Cu2＋ from an electronic Co.,Ltd.in Qingdao.The effects of initial pH,Fe/C（quality）,the dosage of Fe,and the reaction time on removal of Cu2＋were investigated by orthogonal and single factor experiments.The test results indicate that when initial pH value is 4,Fe/C（quality） is 2/1,the dosage of Fe is 60 g/L,and the reaction time is 60 min,the concentration of Cu2＋ in electroplating wastewater decreases from 641.78 mg/L to 0.32 mg/L,the removal efficiency achieves 99.95%,and the COD removal efficiency achieves 23.57%.The concentration of Cu2＋ in electroplating wastewater meets the first-grade standard for discharge of water pollutants in Shandong Province Peninsula Basin（DB37676-2007）.

关 键 词：电镀废水 铜 FE/C微电解 絮凝沉淀 

分 类 号：X781.1[环境科学与工程—环境工程]