检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:朱亚超[1,2] 宋玉普[1] 王立成[1] 宋世德[1]
机构地区:[1]大连理工大学海岸和近海工程国家重点实验室,辽宁大连116024 [2]中国建筑东北设计研究院,辽宁沈阳110003
出 处:《沈阳建筑大学学报(自然科学版)》2011年第5期839-845,共7页Journal of Shenyang Jianzhu University:Natural Science
基 金:国家自然科学基金重点项目(50838001);国家自然科学基金重大研究计划(90815026);中央高校基本科研业务费专项基金项目(DUT11LK38)
摘 要:目的研究混凝土试件受力过程中砂浆与骨料间的粘结滑移特性,为数值模拟提供方便有效的分析模型.方法在含骨料的砂浆试件中,采用骨料上贴光纤及砂浆中埋放光纤的试验方法,测量试件加载直至破坏过程中骨料的应变、砂浆的应变及两者间的相对粘结滑移量.结果试件在受力过程中,砂浆-骨料间存在明显的粘结滑移现象,单轴受压试验中的滑移量远大于单轴受拉试验.采用光纤传感器测量的试验数据比传统传感器的测量结果更加准确稳定.结论基于试验数据,对砂浆-骨料界面的荷载-应变关系进行分析后推导得到砂浆-骨料界面的粘结滑移关系.根据粘结滑移关系的基本特征,提出砂浆-骨料界面粘结滑移本构关系的简化模型.This paper is aiming to investigate the bond slip property of concrete under loading, and a new ex- periment method is proposed. The optical fiber sensors were used to measure the strains of mortar and aggre- gate, the advantage is that two optical fiber sensors in the mortar and aggregate can nestle closely. Experi- mental result shows the relative slip in the compression test is larger than the tensile test. Through the com- parison,it is shown that the results obtained by the optical fiber sensor are more accurate than that obtained by the traditional sensor. Based on the experimental data, the bond slip model between mortar and aggregate is established. It provides a convenient and effective analysis model for the numerical simulations.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.209