铜转炉渣湿法回收钴  

Cobalt Recovery by Hydrometallurgy Process from Copper Converter Slag

作　　者：刘红斌 蒋伟[2] 蒋训雄[2] 汪胜东[2] 范艳青[2] 

机构地区：[1]谦比希铜冶炼有限公司,北京100029 [2]北京矿冶研究总院,北京100070

出　　处：《有色金属（冶炼部分）》2012年第2期19-22,共4页Nonferrous Metals（Extractive Metallurgy)

摘　　要：通过对铜转炉渣的多元素、物相分析,提出湿法处理工艺。考察物料粒度、初始酸浓度、温度、液固比、浸出时间、搅拌速度、通气速度等因素对铜、钴浸出率的影响。结果表明,采用先筛选粗粒度铜精矿后再硫酸浸出,有利于提高铜回收率,铜的累计回收率达到95%左右,钴与铁的累计回收率达到98%以上。Cobalt and copper were recovered by hydrometallurgy process from copper converter slag after multielement and phase analysis.The effects of particle size,initial sulfuric acid concentration,temperature,ratio of liquid to solid,time,stirring speed,ventilation speed and other factors on leaching rate of copper and cobalt were examined.The results show that with sulfuric acid leaching after screening of coarse copper concentrate,total copper recovery rate is over 95%,total recovery rate of cobalt and iron is over 98%.

关 键 词：铜渣 转炉渣 浸出 钴 综合回收 

分 类 号：TF816[冶金工程—有色金属冶金] TF811