丙烯酸酯阳极电泳涂料树脂的制备与性能研究  

Preparation and Performance of Acrylic Resin for Anodic Electrophoretic Coatings

作　　者：钱程根[1] 李国明[1] 程利霞[1] 杨珍娥[1] 李健仪[1] 

机构地区：[1]华南师范大学化学与环境学院,广东广州510006

出　　处：《华南师范大学学报（自然科学版）》2012年第1期86-89,93,共5页Journal of South China Normal University(Natural Science Edition)

基　　金：广东高校高分子新型材料产学研结合示范(暨研究生创新培养)基地项目(cgzhzd1007)

摘　　要：通过自由基溶液共聚合制备了丙烯酸酯阳极电泳涂料树脂,研究了不同酸值和羟值的丙烯酸酯单体以及助溶剂对丙烯酸酯电泳漆性能的影响,以及丙烯酸酯树脂的热固化过程,表征了树脂和漆膜的结构.结果表明,随甲基丙烯酸用量增加,丙烯酸酯树脂水分散体的粒径减小、粘度略有增加、稳定性增强.合成条件为丙烯酸酯共聚树脂酸值为64.6 mg/g、羟值为85.5 mg/g、Tg为20℃,一缩二乙二醇单甲醚和异丙醇的体积比为2:3,所得到的电泳涂料具有良好的槽液稳定性,电泳涂膜经热固化后的外观平整、丰满、光亮,硬度为5H,附着力为1级,冲击强度为50 kg.cm,耐丁酮摩擦>100次.The acrylic anodic electrophoretic coatings were synthesized via radical solution copolymerization.Influences of monomers of acrylic ester with different acid values,hydroxyl values and various cosolvents on the performance of acrylic electrophoretic paint were studied.Thermal curing process of the acrylic resins was studied,and the structures of resins and paint were characterized.It was found that with the increase of the MAA content the particle diameter of the electrophoretic paint decreased significantly,the viscosity of ectrophoretic paint increased slightly and the stability improved greatly.By preparation conditions of acrylic resins copolymer with an acid value of 64.6 mg/g,a hydroxyl value of 85.5 mg/g,Tg of 20 ℃ and a 2∶ 3 volume radio of diethylene glycol monomethyl ether to isopropyl alcohol,the electrophoretic coatings have good bath stability,and the film gained from the electrophoretic coatings by thermal curing presents smooth,plump and bright appearance,with hardness of 5H,adhesion of grade 1,impact strength of 50 kg·cm and resistance to methyl ethyl ketone wipe 100 times.

关 键 词：丙烯酸树脂 阳极电泳涂料 热固化 溶液聚合 性能 

分 类 号：O631[理学—高分子化学]