检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:周冬磊[1,2] 王连国[1] 王占盛[1,2] 黄继辉[1,2]
机构地区:[1]中国矿业大学深部岩土力学与地下工程国家重点实验室,江苏徐州市221008 [2]中国矿业大学力建学院,江苏徐州市221008
出 处:《矿业研究与开发》2012年第1期59-63,共5页Mining Research and Development
基 金:国家重点基础研究发展计划(973)项目(2010CB226805);国家自然科学基金项目(50874103);江苏省自然科学基金项目(BK2008135)
摘 要:针对大断面软岩巷道在开挖支护后所表现出的底鼓现象,对其耦合控制对策进行了数值模拟及工程应用研究。对大断面软岩巷道底鼓变形机理研究表明,大断面软岩巷道底角是支护的关键部位;巷道是一个有机整体,单一的支护效果并不明显,必须进行全断面支护。基于上述研究,提出底鼓耦合控制对策,即在锚网索耦合支护的基础上,利用底角注浆锚杆对关键部位进行加强支护,从而达到控制巷道底鼓变形的目的。数值模拟与工程应用结果表明,采用底鼓耦合支护形式,可以有效地控制围岩底鼓变形,巷道围岩稳定性大大提高。研究结果对于大断面软岩巷道底鼓控制具有一定的指导意义。The failure mechanism and coupling control countermeasure of floor heave of soft rock roadway within large section after excavating and supporting were investigated by numerical simulations. Some typical cases of engineering applications were also analyzed. The study on the floor heave's mechanism of soft rock roadway with large section indicated that the bottom comers of roadway were the key position for supporting. For the roadway as an organic whole, a haploid supporting was not of distinct supporting effect, it should be supported on whole section. For controlling floor heave deformation, a coupling control countermeasure was put forward based on the research result, that meant the key positions of surrounding rock should be reinforced at the bottom comers of roadway by anchor bolt - grouting after bolt - net -anchor coupling support. The results of numerical simulation and engineering applications showed that the coupling support for floor heave can effectively control the floor heave deformation of roadway and definitely enhance the stability of surrounding rock of roadway.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117