电化学法对印染废水COD_(Cr)的处理效果研究  

Study on the COD_(Cr) removal efficiency from printing & dyeing wastewater by electrochemical process

作　　者：张大全[1] 高立新[1] 杨文莲[1] 

机构地区：[1]上海电力学院能源与环境工程学院,上海200090

出　　处：《工业水处理》2012年第2期47-50,共4页Industrial Water Treatment

基　　金：上海市科委能力建设项目(08160512600)

摘　　要：印染废水成分复杂,可生化降解性差。采用Fe-PbO2/不锈钢为阳极,不锈钢为阴极,活性炭为颗粒电极,电催化氧化处理上海某印染厂废水。当pH为3,电流密度为0.028 A/cm2,硫酸铝浓度为0.16 mol/L,极板距离为6 cm,电解时间为10 min时CODCr去除率达到71.1%,BOD5/CODCr由处理前的0.126上升为0.34,可生化降解性明显提高。Fe-PbO2/不锈钢阳极和不锈钢阳极在印染废水中的循环伏安曲线表明镀PbO2层的不锈钢电极具有较好的催化活性。The components of printing ＆ dyeing wastewater are complicated, and its biodegradability is poor. wastewater in a Shanghai printing and dyeing plant has been treated with Fe-PbO2/stainless steel as an anode, stainless steel as a cathode, and activated carbon as particle electrodes by electro-catalytic oxidation process. When its pH is 3,current density 0.028 A/cm2,aluminium sulfate solution concentration 0.16 mol/L,working electrode space 6 cm, and electrolysis time 10 min,the CODCr removing from 0.126 before the treatment to 0.34 ,and the biodegradab rate reaches 71.1%. The BODs/CODCr value increases ility increases remarkably. The cyclic voltage current curve of Fe-PbO2/stainless steel anode and stainless steel anode in printing ＆ dyeing wastewater indicates that the stainless steel electrode electroplated with PbO2 layer has better catalytic activity.

关 键 词：印染废水 电化学催化氧化 CODCR BOD5 

分 类 号：X703[环境科学与工程—环境工程] TQ035[化学工程]