检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:梁金栋[1] 陆林广[1] 徐磊[1] 王刚[1] 董雷[1]
机构地区:[1]扬州大学水利科学与工程学院,江苏扬州225009
出 处:《南水北调与水利科技》2012年第1期1-5,共5页South-to-North Water Transfers and Water Science & Technology
摘 要:为了合理确定我国低扬程泵装置主要工况水力性能的考核指标,以适应我国大型低扬程泵站建设事业不断发展的需要,提出建立在水泵模型同台测试试验数据和流道优化水力设计研究成果基础上的推算低扬程泵装置效率的基本方法,即:泵装置效率由泵段效率和流道效率的乘积得到,其中,泵装置中的泵段效率由同台测试结果经修正后得到,流道效率由流道水力损失及泵装置扬程计算得到;应用该方法推算了大型泵站贯流泵装置和立式泵装置模型主要工况的效率考核指标。In order to determine the evaluation indexes of the pump system efficiency under the operation conditions for a pum- ping station with low head more reasonably and to meet the needs of the continuous development of large pumping stations in China, the basic method was obtained to calculate the pump system efficiency with low head based on the test data of pump models on the same test bed and the research results of the optimum hydraulic design for flow channel of the pump system. The pump system efficiency can be determined by multiplying the pump segment efficiency with the efficiency of the flow channel, where the pump segment efficiency in the pump system may be modified according to the results obtained from the pump model tests on the same test bed, and the efficiency of the flow channel may be calculated according to the hydraulic loss along he flow channel and pump system head. The evaluation indexes of the pump system efficiency under the operation conditions were calcu- lated for the shaft tubular pump system and the vertical flow pump system of large pumping stations using the proposed method.
分 类 号:TV68[水利工程—水利水电工程] TV675
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117