检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:江国栋[1] 李怀栋[1] 沈晓冬[1] 陈海峰[1]
机构地区:[1]南京工业大学材料科学与工程学院,江苏南京210009
出 处:《弹性体》2012年第1期42-45,共4页China Elastomerics
基 金:国防科学技术工业委员会资助项目(JPPT21152489)
摘 要:考察了无机阻燃剂Al(OH)3、十溴联苯醚(DBDE)/Sb2O3复合阻燃剂和磷系FR-710阻燃剂对缩合型RTV有机硅粘接剂力学性能及燃烧性的影响。结果表明,当Al(OH)3用量为80份时,有机硅粘接剂的剪切强度和拉伸强度分别达到最大值1.67MPa和2.41MPa,而DBDE/Sb2O3复合阻燃剂和磷系FR-710阻燃剂的加入,使得试样的拉伸强度和剪切强度明显降低。在Al(OH)3用量为80份的基础上,复合阻燃剂和FR-710用量分别为15份、12份时,RTV阻燃有机硅粘接剂的燃烧时间接近2s。Silicone adhesive for smoke flues requires flame retardancy. In this paper,the effects of inorganic flame retardant A1 (OH) 3, decabromodiphenyl ether (DBDE)/Sb2O3 and phosphorus flame retardant of FR-710 on mechanical and flame properties of RTV silicone adhesive were investigated. The results showed that the tensile strength and shear strength of silicone adhesive are maximum 1.67 MPa and 2. 41 MPa respectively when the content of AI(OH)a was 80 phr. However, the tensile strength and shear strength are obviously decreased after DBDE/Sb2O3 and FR-710 were used. On the base of 80 phr AI(OH)3, the burning time of silicone adhesive is almost 2 seconds when DBDE/Sb2O3 and FR-710 are 15 phr, 12 phr respectively.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.148.250.110