基于飞思卡尔单片机的木棒长度测量系统  

Stick Length Measurement System Based on Freescale Microcontroller

作　　者：闫冬梅[1] 康冰[2] 王有维[1] 

机构地区：[1]吉林大学网络与教育技术中心,长春130062 [2]吉林大学通信工程学院,长春130023

出　　处：《吉林大学学报（信息科学版）》2012年第1期95-99,共5页Journal of Jilin University（Information Science Edition）

摘　　要：为解决工业生产中长度测量的问题,设计了基于飞思卡尔单片机的木棒长度测量系统。该系统以飞思卡尔单片机为核心控制器,利用匀速转动的直流电机带动履带,履带两侧等距离放置三组红外发射与接收管。将木棒放在履带上,当木棒通过红外对管时利用飞思卡尔单片机的内部计时器计时,得出木棒的移动时间,从而算出木棒的长度,并用1602显示屏显示出木棒的长度。通过实验验证,该系统的测量误差小于0.05%。In order to solve the problem of the length measurement in industrial settings ,we designed a system measuring the stick length based on freescale microcontroller. This system used a freescale mi- crocontroller as the key controller. There is a track driven by a DC （Direct Current） motor which is turning with a constant speed. We placed three groups infrared transmitting and receiving devices whose distance was equal on both sides of the track. Place the stick on the track and the internal timer began to countime when the stick crossed the infrared device. Then we can get the moving time of the stick and obtaining the length of the stick. Finally, we used a 1602 monitor to display the length of the stick. Through the experiment , the measurement error of this system was less than 0.05%.

关 键 词：飞思卡尔单片机 直流电机 红外对管 计时器 

分 类 号：TG156[金属学及工艺—热处理] TP271[金属学及工艺—金属学]