基于CO浓度求解煤自燃临界温度的影响因素分析  

The Analysis of Influencing Factors on Coal Spontaneous Combustion Calculate Critical Temperature Based on CO Concentration

作　　者：焦新明[1,2] 王德明[1,2] 仲晓星[1,2] 李金帅[1,2] 雷丹[1,2] 

机构地区：[1]中国矿业大学安全工程学院,江苏徐州221116 [2]煤炭资源与安全开采国家重点实验室,江苏徐州221116

出　　处：《煤矿安全》2012年第3期11-15,共5页Safety in Coal Mines

基　　金：国家自然科学基金资助项目(50674088);国家自然科学基金专项基金资助项目(50927403);江苏省创新攀登计划资助项目(BK2009004)

摘　　要：临界温度是表征煤自燃倾向性的重要指标,基于程序升温条件下利用CO浓度与温度的变化求解临界温度是一种准确快捷的测试方法。研究分析了煤样粒径、水分含量及气体流量对煤临界温度测定结果的影响;并确定了最佳实验条件,即煤样粒径0.12～0.18 mm,干燥温度50℃,气体流量100 mL/min。Critical temperature is an important indicator to represent spontaneous combustion of coal. It is an accurate and efficient testing method, based on programming temperature, to calculate critical temperature through the changes of CO concentration and temperature. The paper analyzed coal particle size, moisture content and gas flow, which can get some influence to the critical temperature . finally. The best experimental conditions were determined, that was 0.12 -0.18 mm of coal particle size,50 ℃ of dry temperature, 100 mL/min of the flow rate.

关 键 词：临界温度 程序升温 粒径 水分 气流量 自燃 

分 类 号：TD752.2[矿业工程—矿井通风与安全]