检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:宋文胜[1] 冯晓云[1] 侯黎明[1] 葛兴来[1]
出 处:《电工技术学报》2012年第2期165-172,共8页Transactions of China Electrotechnical Society
基 金:国家科技支撑计划(2009BAG12A05);西南交通大学博士生创新基金资助项目
摘 要:针对高速动车组中三电平二极管中性点钳位(NPC)逆变器供电的牵引传动系统,探讨了一种基于PI控制器和60°坐标系空间矢量调制算法(SVPWM)的异步牵引电机低速域的直接转矩控制(DTC)驱动方案。直接转矩控制性能好坏的决定因素之一就是磁链观测器的准确性,为了获得较好的转矩控制性能,本文首先采用了一种改进U-I积分模型为定子磁链观测器,并给出了基于PI控制器的转矩控制器和磁链控制器设计方案;然后给出了60°坐标系下SVPWM算法的详细设计方案,与传统的SVPWM相比,该SVPWM能够有效地减小计算时间,并在此基础上,通过调节中点电位平衡因子的大小来分配冗余小矢量的作用时间,以达到平衡直流侧两电容上电压的目的;最后,通过基于Maltab/Simulink软件的仿真研究和TMS320F2812与dSPACE的高速动车组牵引传动半实物实验台的实验研究,验证了基于PI控制和60°坐标系SVPWM的三电平直接转矩控制算法的有效性和可行性。A direct torque control (DTC) scheme of traction induction motor based on PI controller and space vector pulse width modulation (SVPWM) in 60° coordinate frame is adopted for traction system supplied by three-level diode neutral point clamped(NPC) inverter in high speed electrical multiple units (EMU). Firstly, in order to obtain a perfect torque performance, a modified U-I integration stator flux observer is presented, and the torque and stator flux control schemes based on PI controller are shown. Secondly, SVPWM in 60° coordinate frame is designed in detail, which can reduce calculation times effectively compared with traditional SVPWM. On basis of this, to balance the DC-link capacitors' voltages, duty ratio times of redundancy small vectors are allocated by regulating neutral point control factor. Finally, validity and feasibility of the three-level direct torque control scheme based on PI controller and SVPWM in 60° coordinate frame are verified by Matlab/Simulink software simulation and Hardware-in-loop experiment of traction experimental prototype for high speed EMU based on TMS320F2812 and dSPACE.
关 键 词:三电平 中点电位控制 SVPWM 直接转矩控制 60°坐标系
分 类 号:TM921.5[电气工程—电力电子与电力传动] TM922
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.16