氰酸酯改性环氧树脂的研究  

Epoxy Resin Modified by Cyanate Ester

作　　者：陈青[1] 魏伯荣[2] 宫大军[2] 钟瑶冰[2] 雍国新[1] 

机构地区：[1]海南工商职业学院,海口571100 [2]西北工业大学理学院应用化学系,西安710129

出　　处：《绝缘材料》2012年第1期49-51,61,共4页Insulating Materials

摘　　要：采用红外光谱对氰酸酯树脂(CE)改性环氧树脂的共固化反应进行分析,测试了环氧树脂固化物的介电常数(ε)、介质损耗因数(tanδ)和吸湿率,通过TG分析了固化物的热稳定性。结果表明:随着CE含量的增加,环氧树脂固化物的ε、tanδ下降;随着测量频率的增加,固化物的ε下降,tanδ上升。改性环氧树脂的吸水率降低,热稳定性变化较小,介电性能明显提高。The curing reaction of epoxy resin modified by cyanate ester（CE） was analyzed by infrared spectra. The dielectric constant（e）, dielectric loss factor（tang） and water absorption rate of the cured epoxy resin were tested, and the thermal stability of the cured resin was analyzed by TG. The results show that with the increase of CE content, the e and tang of the cured resin decrease. With the increase of measuring frequency, the e decreases and the tang increases. After modified, the water absorption rate of the epoxy resin decreases, the thermal stability has a little change, and the dielectric property is improved significantlv.

关 键 词：氰酸酯树脂 环氧树脂 改性 介电性能 

分 类 号：TM215[一般工业技术—材料科学与工程]