高速电弧喷涂含稀土FeMnCrNiAl/Cr_3C_2复合涂层的组织与耐磨性能  

Microstructure and wear resistance of RE-containing FeMnCrNiAl/Cr_3C_2 composite coatings prepared by high velocity arc spraying

作　　者：晁拥军[1] 刘少光[2,3] 戴炎彬[2] 苏茂[2] 郦剑[4] 桑劲鹏[2] 

机构地区：[1]温州职业技术学院电气电子工程系,浙江温州325035 [2]江苏科技大学材料科学与工程学院,江苏镇江212003 [3]浙江科得力新材料有限公司,浙江温州325029 [4]浙江大学材料科学工程系,浙江杭州310027

出　　处：《材料热处理学报》2012年第3期137-141,共5页Transactions of Materials and Heat Treatment

基　　金：浙江省科技厅计划资助项目(2009C31129)

摘　　要：利用高速电弧喷涂技术在20钢表面分别制备了含稀土和不含稀土的FeMnCrNiAl/Cr3C2涂层。结合光学显微镜、显微硬度、场发射扫描电子显微镜、能谱分析等分析方法对喷涂层的微观组织、显微硬度、结合强度、常温滑动摩擦磨损、高温冲蚀磨损等性能进行研究。结果表明:FeMnCrNiAl/Cr3C2涂层具有较高的结合强度、显微硬度和耐磨性能,加入稀土能降低涂层摩擦系数、提高涂层常温滑动磨损和高温冲蚀磨损性能。Both RE-containing and RE-free FeMnCrNi/Cr3C2 composite coatings were prepared on 20G steel substrate surface by high velocity arc spraying（HVAS） technology,respectively.Microstructure,micro-hardness,binding strength,sliding friction and wear resistance at ambient temperature,and erosion behaviour at high temperature of the coatings were studied by means of optical microscopy,micro-hardness test,field emission scanning electron microscopy（FESEM） and energy spectrum analysis.The result shows that the binding strength,micro-hardness and wear resistance of the FeMnCrNiAl/Cr3C2 coating are fairly good.The addition of RE-earth element decreases the coatings friction coefficient and improves both the ambient sliding wear resistance and high temperature erosion performance.

关 键 词：高速电弧喷涂 中间合金 复合涂层 磨损机理 

分 类 号：TG174.44[金属学及工艺—金属表面处理]