检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:程琴[1] 郭洪民[1] 杨湘杰[2] 周龙富[2]
机构地区:[1]南昌大学材料科学与工程学院 [2]南昌大学机电工程学院
出 处:《特种铸造及有色合金》2012年第3期243-246,共4页Special Casting & Nonferrous Alloys
基 金:国家自然科学基金资助项目(50965015)
摘 要:通过对比Cu-Ca合金铸态组织,研究了半固态等温处理主要工艺参数对半固态Cu-Ca合金组织的影响,得出了其半固态组织的演变规律。结果表明,在半固态等温处理工艺参数中,影响组织的主要参数为等温温度和保温时间。在一定选择范围内,随着等温温度的升高和保温时间的延长,组织将发生由树枝晶组织到非枝晶组织的一系列转变。研究发现,保温温度为957~967℃,等温时间为45~60min时,合金的球化效果最好,圆整度最高。Effects of different parameters of semi-solid isothermal heat treatment on microstructure of semi-solid Cu-Ca binary alloy were investigated,and through comparatively observing as-cast microstructure,the evolution mechanism of semi-solid microstructure after isothermal heat treatment was presented.The results indicate that the microstructure evolution of semi-solid Cu-Ca alloy after isothermal heat treatment is mainly related to the isothermal temperature and holding time.In a given range,with increasing in the semi-solid isothermal temperature or the holding time,the microstructure is evolved from dendrite into un-dendrite structure.The desirable spherical structure with the best roundness can be observed in the semi-solid Cu-Ca alloy with holding at 957~967 ℃ for 45~60 min.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.145