胶合板用VAc-BA-MMA-AA四元共聚乳液胶黏剂的制备与表征  

Preparation and characterization of VAc-BA-MMA-AA copolymer emulsion adhesive for plywood

作　　者：张新荔[1] 吴义强[1,2] 胡云楚[1] 吴韧[1] 刘晓梅[1] 

机构地区：[1]中南林业科技大学材料科学与工程学院,湖南长沙410004 [2]竹业湖南省工程研究中心,湖南长沙410004

出　　处：《中南林业科技大学学报》2012年第1期94-99,共6页Journal of Central South University of Forestry & Technology

基　　金：国家"十二五"科技计划课题(2012BAD24B03);国家林业公益性行业科研重大专项(201204704);湖南省科技重大专项(2011FJ1006);中南林业科技大学木材科学与技术国家重点学科资助项目

摘　　要：为了提高聚醋酸乙烯酯乳液胶黏剂的胶合强度和耐水性能,以醋酸乙烯酯(VAc)、丙烯酸丁酯(BA)、甲基丙烯酸甲酯(MMA)和丙烯酸(AA)为单体原料,采用半连续乳液聚合方法制备胶合板用VAc-BA-MMA-AA四元共聚乳液胶黏剂。利用傅里叶变换红外光谱仪、扫描电镜、热重分析仪等测试手段对乳胶膜的化学结构、表面形貌和热稳定性等进行了分析。结果表明:与VAc均聚乳液相比,四元共聚乳液具有较高的热稳定性,乳胶膜的表面形貌更加规整;四元共聚乳液胶合的杨木三层胶合板的胶合强度达到3.16 MPa,耐水性比用均聚乳液胶合时提高3倍,达到Ⅱ类胶合板的性能标准。In order to improve the bonding strength and water resistance of polyvinyl acetate emulsion adhesive, a new kind of four- component copolymer emulsion adhesive suited for plywood was prepared by semi-continuous emulsion polymerization with vinyl acetate, butyl acrylate, methyl methacrylate, and acrylic acid as monomers. The chemical structure, surface morphology and thermalstability were characterized by Fourier transform infrared spectrometer, scanning electron microscope, and thermal gravity analyzer, respectively. The results show that the four-component copolymer emulsion exhibited a higher thermal stability and more regular surface morphology of latex film, compared with the homo-polymer emulsion. The test results reveal that the bonding strength of three-layerpoplar plywood glued by the copolymer emulsion was 3.16 MPa, water resistance increased by 3 times than the sample glued by homo- polymer emulsion, thus reaching Ⅱ grade standards of plywood performance.

关 键 词：聚醋酸乙烯酯 共聚乳液 木材胶黏剂 耐水性 

分 类 号：S784[农业科学—林学] TQ432.436[化学工程]