竹粉/高密度聚乙烯复合材料性能研究  

Study on the performance of bamboo powder and HDPE composites

作　　者：周钢[1] 喻云水[1,2] 吴庆定[1] 姚静[1] 

机构地区：[1]中南林业科技大学材料科学与工程学院,湖南长沙410004 [2]竹业湖南省工程研究中心,湖南长沙410004

出　　处：《中南林业科技大学学报》2012年第1期113-116,共4页Journal of Central South University of Forestry & Technology

基　　金：湖南省科技重大专项(2011FJ1006);湖南省自然科学基金项目(09JJ6071);湖南省教育厅高校产业化培育项目(11cy027);中南林业科技大学青年基金项目(2009032B);中南林业科技大学木材科学与技术国家重点学科资助项目

摘　　要：研究了竹粉/高密度聚乙烯(HDPE)复合材料的生产工艺,对其多项性能进行测试。采用双辊开炼机进行复合材料的共混制备;熔融指数仪测定不同配比复合材料的流动性;注塑成型机制备各种标准力学性能试样;拉力试验机和冲击试验机测试力学性能。结果表明随着竹粉含量的增加,材料熔融流动性大大降低;冲击强度下降明显;拉伸强度首先上升,在竹粉含量超过30%后又下降;注塑成型制品收缩率下降。The processing technology of bamboo powder and HDPE composites was studied, and several performances of the composites were tested. The composites were prepared by blending bamboo powder with HDPE, using double-roll open mill. The melt fluidity of different ratio composite materials was measured by the fusion index instrument. Various standard mechanical property samples weremade by injection forming machine. The mechanics performances of the composites samples were tested by tensile testing machine and impact testing machine. The results show that as the bamboo powder content ratio rose, the composites melt fluidity declined greatly; the impact strength dropped obviously; the tensile strength ascended at first, then it went down when the bamboo powder content ratioexceeded 30 percent, and the shrinkage percentage of injection products decreased.

关 键 词：竹粉 高密度聚乙烯 复合材料 性能研究 

分 类 号：S784[农业科学—林学]