PSC型导叶式旋风管内颗粒返混夹带实验研究  

Experimental Study on Back-mixing of Particles in PSC-type Guide Vane Cyclone Tube

作　　者：韩恒标 王建军[2] 亓成刚 金有海[2] 

机构地区：[1]中海石油(中国)有限公司湛江分公司,广东湛江524057 [2]中国石油大学(华东)化学工程学院,山东青岛266555

出　　处：《石油化工设备》2012年第2期1-7,共7页Petro-Chemical Equipment

基　　金：教育部重点项目(109159);中央高校基本科研业务费专项资金资助(09CX04027A)

摘　　要：采用五孔球探针测量仪与等动采样法,对PSC型导叶式旋风管内气固两相流场、浓度场分布进行测试,并对不同排尘结构进行比较,据此研究了PSC型导叶式旋风管内的颗粒返混夹带现象。结果表明,排尘段返混存在两个区域,返混夹带主要以10μm以下小颗粒为主,开缝后的排尘锥具有很强的抗返混能力。The distribution of gas-solid two-phase flow in the PSC-type guide vane cyclone tube was measured with five-orifice pitot tube and by means of isokinetic sampling method.The characters of flow field and concentration field were investigated under different dust discharge structures of the cyclone tube.The back-mixing of particles in the PSC-type guide vane cyclone tube was investigated on these grounds.The results showed that the back-mixing of particles in the dust discharge section existed in two areas,the samll particles under 10 μm were the main part in the back-mixing of particles.The dust discharge cone had strong ability to resist the back-mixing of particles,and openning slots can strengthen this ability.

关 键 词：导叶式旋风管 排尘结构 颗粒返混夹带 

分 类 号：TQ051.84[化学工程]