检测储存引信后坐保险所需加速度参数分析  

Analysis of Acceleration Parameters for Detecting the Setback Arming Device of Storage Fuze

作　　者：杨清熙[1] 崔亮[1] 赵志宁[2] 刘晗[2] 

机构地区：[1]军械工程学院弹药工程系,河北石家庄050003 [2]炮兵指挥学院基础部,河北宣化075100

出　　处：《测试技术学报》2012年第2期121-124,共4页Journal of Test and Measurement Technology

摘　　要：当对储存引信后坐保险机构进行动态模拟测试时,要先确定所需模拟后坐加速度参数,针对这一问题,论文综合考虑了引信单行程后坐保险机构的设计生产和实际应用环境要求.根据其工作原理,给出了对单行程后坐保险机构进行安全性测试和解除保险可靠性测试所需模拟的后坐加速度范围.分析了解除保险所需模拟后坐加速度与其持续时间的关系.经对某引信的模拟试验证明这种方法是合理的.The acceleration parameters for storage fuze need to be firstly calculated when the setback arming device of fuze is tested by dynamic simulation. After analyzing the working principle of the oneway setback arming device, the acceleration range is obtained for fuze safety test and the arming reliability test, and the re lationship between the acceleration and its duration for arming is studied. Meanwhile, we comprehensively considered the design and production index of the setback arming device and the real environmental require- ment. The simulation test for a practical fuze indicates that the method is reasonable.

关 键 词：检测 储存引信 单自由度后坐保险机构 加速度 持续时间 

分 类 号：TJ430.6[兵器科学与技术—火炮、自动武器与弹药工程]