井下螺杆增压提速装置关键部件设计  

Design of Key Component for Down-hole Screw-type Pressure Intensifier for ROP Enhancement

作　　者：张玉英[1] 赵健[1] 巴鲁军[1] 刘永旺[1] 徐依吉[1] 

机构地区：[1]中国石油大学(华东)石油工程学院,山东青岛266555

出　　处：《石油矿场机械》2012年第3期31-35,共5页Oil Field Equipment

基　　金：中国石油集团公司重点研究课题(05A20301)

摘　　要：钻井提速是各大石油钻井公司研究的重要方向,油气钻井工程实践表明,提高井底钻头喷嘴射流压力可以大幅提高钻井速度。在分析现有井下增压的基础上,研制了井下螺杆增压装置。该装置以螺杆泵作为动力,通过新型换向机构将旋转运动转换为增压泵的往复运动,成功实现了井底增压;钻头超高压喷嘴射流压力达到80～100MPa,有效地实现了超高压射流钻井,达到了提高钻速、降低钻井成本的目的。ROP enhancement has been an important research direction in maior oil drilling companies for long time, which shows that improving the bottom drill bit nozzle iet pressure can significantly increase drilling speed in oil and gas drilling practice. Downhole Screwtype Pressure Intensifier is a new kind of downhole Device, using helicoid hydraulic motor as the power, conver ting the rotation movement of the helicoid hydraulic motor into the reciprocating movement of the piston pump by a spiral cant type reverse mechanism. Part of the total drilling fluid can be pressurized up to 80- 100 MPa. The high pressure drilling fluid erupts by the ultra high pressure nozzles in the ultra high pressure PDC bit. The rock breaking was realized by this device,to im prove the rock breaking efficiency, to increase drilling speed, thus the drilling cost is reduced remarkably.

关 键 词：井下增压装置 螺杆泵 换向机构 超高压钻头 

分 类 号：TE921.2[石油与天然气工程—石油机械设备]