气象辐射计量检测系统装调方法研究  

Installation and adjustment for meteorological radiation measuring system

作　　者：高迪[1] 张国玉[1,2] 高越[1] 苏拾[1,2] 吕文华[3] 贺晓雷[3] 高玉军[4] 

机构地区：[1]长春理工大学,长春130022 [2]吉林省光电测控仪器工程技术研究中心,长春130022 [3]中国气象局气象探测中心,北京100081 [4]中国科学院长春光学精密机械与物理研究所,长春130033

出　　处：《气象水文海洋仪器》2012年第1期1-4,共4页Meteorological,Hydrological and Marine Instruments

基　　金：国家公益性行为科研专项资助项目(项目编号:GYH00706003;201006043);吉林省科技发展计划资助项目(项目编号:20118012)

摘　　要：为满足气象辐射计量检测系统对气象辐射表的检测与标定要求,以研制太阳模拟器及多维检测平台为研究对象,提出了一种系统装调方法。建立气象辐射计量检测系统装调流程后,完成气象辐射计量检测系统装调过程,分析光学积分器对辐照均匀性的影响,并给出辐照不均匀性测试方法。通过实验测试,该气象辐射计量检测系统可完成不同时段太阳光束的精确模拟,并满足φ60mm口径内辐照不均匀度在±1%范围内。φ170mm口径内辐照不均匀度在±2%范围内的设计要求。In order to meet the needs of meteorological radiation measuring system for testing and calibration of meteorological pyrgeometer, with developed solar simulator and multidimensional detection platform as the research object,this paper puts forward a method for system installation and adjustment. After establishment of installation and adjustment flow for meteorological radiation measuring system, the process of its installation and adjustment is completed, the effect of optical integrator on the irradiation uniformity is analyzed, and irradiation uniformity test methods are given out. Through the test, the meteorological radiation measuring system can accomplish the accurate simulation of the solar beam in different periods. It＇s satisfied to design requirements that irradiation nonuniformity of φ60 mm and φ170 mm caliber are less than ±1% and±2% respectively.

关 键 词：太阳模拟器 光学积分器 装调 

分 类 号：V524.3[航空宇航科学与技术—人机与环境工程]