检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]西安电子科技大学ISN国家重点实验室,陕西西安710071
出 处:《华中科技大学学报(自然科学版)》2012年第3期18-21,共4页Journal of Huazhong University of Science and Technology(Natural Science Edition)
基 金:国家高技术研究发展计划资助项目(2007AA01Z288);国家自然科学基金资助项目(60772138)
摘 要:针对在莱斯信道下对接收信号进行最大多普勒频移估计的需求,提出基于电平交叉率的传统多普勒频移估计方法,引入循环迭代的思想使得接收端的滤波器带宽达到最优,接收信号通过最优滤波后,再进行基于电平交叉率的多普勒频移估计,大大减缓了噪声对估计性能的影响.改进算法的复杂度虽然有所提高,但在莱斯信道下,其比传统的多普勒频移估计算法更能准确估计出接收信号的多普勒频移,仿真结果验证了算法的有效性和优越性.According to the demand of maximum Doppler frequency estimation on the received signal in the Rice channel,on the basis of the tradition Doppler frequency shift estimation method based on the level crossing rate,a iterative design was introduced to make the bandwidth of the receiving filter achieve optimal,then the Doppler frequency shift was estimated based on the level crossing rate after the received signal through filtering optimally,which slowed down the effect of noise on the performance of estimation greatly.The complexity of the novel method has increased,but the novel method can estimate the frequency shift more accurately than the tradition method in the Rice channel.Simulation results show that the method can estimate the Doppler frequency shift accurately and effecti-vely.
关 键 词:滤波器 多普勒频移 电平交叉率 莱斯信道 循环迭代 估计
分 类 号:TN911[电子电信—通信与信息系统]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222