MoO_3作空穴注入层的绿光有机电致发光器件制备及其性能研究  

Fabrication and Performance Research of Green Organic Light Emitting Device with MoO_3 Hole Injection Layer

作　　者：史高飞[1,2] 牛红林[1,2] 鲁文武[1,2] 胡俊涛[1] 

机构地区：[1]特种显示技术教育部重点实验室,特种显示技术国家工程实验室,现代显示技术省部共建国家重点实验室培育基地,合肥工业大学光电技术研究院,安徽合肥230009 [2]合肥工业大学仪器科学与光电工程学院,安徽合肥230009

出　　处：《液晶与显示》2012年第2期177-181,共5页Chinese Journal of Liquid Crystals and Displays

基　　金：国家973计划项目(No.2010CB334704;No.2012CB723406);国家自然科学基金(No.61040015;No.61107014)

摘　　要：用真空热蒸镀的方法制备了绿光有机电致发光器件,并对其工艺流程进行了详细的描述。器件结构为ITO/MoO3(xnm)/N,N′-diphenyl-N,N′-bis(1-naphthyl)-(1,18-biphenyl)-4,4-diamine(NPB)(40nm)/tris(8-hydroxyquinoline)aluminum(Alq3)(60nm)/LiF(1nm)/Al(150nm),其中x=0,5nm。实验中,对ITO基片进行氧等离子体表面处理,能够有效减小ITO表面的接触角。通过对器件的光电性能测试,研究了MoO3作空穴注入层对有机电致发光器件性能的影响。实验结果表明,空穴注入层MoO3的最高占据分子轨道(HOMO)能级较好的与ITO功函数匹配,降低了空穴注入势垒,提高了器件的发光亮度和效率。当外加电压小于10V时,器件的电流密度随外加电压的增加而增加,但变化不明显;当外加电压大于10V时,器件的电流密度明显增强,发光色度几乎不随驱动电压的改变而改变,色坐标稳定在(0.36,0.55)附近。A green organic light emitting device（OLED） with the structure of ITO/MoO3（x nm）/N,N′-diphenyl-N,N′-bis（1-naphthyl）-（1,18-biphenyl）-4,4-diamine（NPB）（40 nm）/tris（8-hydroxyquinoline）aluminum（Alq3）（60 nm）/LiF（1 nm）/Al（150 nm） have been fabricated by vacuum deposition method,x=0,5 nm.The detail process has been described.It was found that the treatment on the surface of ITO substrates by oxygen plasma can effectively reduce the contact angle of the ITO surface in the experiments.By measuring and analyzing the performance of luminescence and electrical of device,the influences of the hole injection layer MoO3 on device performance was investigated.Experimental results show that HOMO level of MoO3 can reasonably match ITO work function,which reduces the hole-injecting barrier and improves the brightness and efficiency of device.When forward voltage is less than 10 V,the current density of device does not change significantly with the voltage increases;When the voltage is more than 10 V,the current density increases significantly.The chroma of device stabilizes in green light district of（0.36,0.55） with the changes of the driving electric voltage.

关 键 词：有机电致发光器件 工艺流程 绿光 光电性能 

分 类 号：TN383.1[电子电信—物理电子学]