Preparation and properties of Al-Mn alloy coatings in NaCl-KCl-AlCl_3-CeCl_3 molten salts  

作　　者：张丽鹏 于先进 董云会 赵增典 陈恩泽 梁寒冰 

机构地区：[1]School of Chemical Engineering,Shandong University of Technology

出　　处：《Journal of Rare Earths》2012年第3期278-282,共5页稀土学报（英文版）

基　　金：Project supported by the National Natural Science Foundation of China (51054003, 50374045);Shandong Province Natural Science Foundation (Y2007F60, ZR2011BL005);Shandong Province High Education Science Technology Program (J09LB59);Shandong Province Mid-life-Youth Scientists Research Encouraging Foundation (BS2009NJ007)

摘　　要：Al-Mn alloy coatings were electrodeposited on an iron substrate from AlCl3-NaCl-KCl molten salts with anhydrous MnCl2 enhanced by the addition of CeCl3. The microstructure and properties of the Al-Mn alloy coatings were investigated, and scanning electron microscopy, X-ray diffraction, and polarization curves were used to determine the composition, surface morphology, phase structure, and corrosion resistance of the obtained deposits. The results showed that the surface coatings were smooth, and that the crystallites were dense and uniform when 0.22 wt.% CeCl3 was added to the molten salt. An amorphous mixture of Al and Al6Mn was obtained. CeCl3 enhanced the corrosion resistance and increased the hardness of the single amorphous phase alloys. The pitting potential of the coating was approximately -1.1239 V, and its hardness was 390 kgf/mm2.Al-Mn alloy coatings were electrodeposited on an iron substrate from AlCl3-NaCl-KCl molten salts with anhydrous MnCl2 enhanced by the addition of CeCl3. The microstructure and properties of the Al-Mn alloy coatings were investigated, and scanning electron microscopy, X-ray diffraction, and polarization curves were used to determine the composition, surface morphology, phase structure, and corrosion resistance of the obtained deposits. The results showed that the surface coatings were smooth, and that the crystallites were dense and uniform when 0.22 wt.% CeCl3 was added to the molten salt. An amorphous mixture of Al and Al6Mn was obtained. CeCl3 enhanced the corrosion resistance and increased the hardness of the single amorphous phase alloys. The pitting potential of the coating was approximately -1.1239 V, and its hardness was 390 kgf/mm2.

关 键 词：Al-Mn alloy coatings molten salt CeCl3 properties rare earths 

分 类 号：TG146.21[一般工业技术—材料科学与工程]