检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈刚[1,2] 刘占芳[1] 冯晓伟[1] 姚国文[3]
机构地区:[1]重庆大学资源及环境科学学院工程力学系,重庆400030 [2]重庆工商大学计算机科学与信息工程学院,重庆400067 [3]重庆交通大学土木工程学院,重庆400074
出 处:《功能材料》2012年第7期855-858,共4页Journal of Functional Materials
基 金:国家重点基础研究发展计划(973计划)资助项目(2011CB612211);国家自然科学基金资助项目(11072276;10802105)
摘 要:利用轻气炮对不同厚度的氧化铝陶瓷试件进行了平板冲击实验,并借助激光速度干涉仪(VISAR)测试了试件的自由面速度历程。实验结果显示,自由面速度曲线上存在表征破坏波出现的二次压缩信号。根据实验结果计算获得了破坏波穿过试件的运动进程,并确定了试件中破坏波的运动轨迹近似为一条直线,得出在冲击压力为7.16GPa时试件内破坏波波速约为5.051km/s,破坏延迟时间约为0.105μs。最后简单分析了该现象产生的物理机制。A series of plate impact experiment with alumina specimens in different thicknesses were conducted on a gas gun in order to further investigate the delayed failure phenomenon under shock loading.With the aid of the VISAR technique,a evident recompression signal was observed in the history of rear free surface of specimen,which indicates the generation of the failure wave.According to the experimental results,the failure wave trajectory was explored.The results show that the failure wave is generated with a delayed time of about 0.105μs behind the shock wave front,and propagates into the stressed body with a velocity about 5.051km/s under the impact stress of 7.16GPa.The physical mechanism of this phenomenon is discussed in the end.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.171