调经颗粒的成型工艺研究  

Study on the Molding Process of Tiaojing Granules

作　　者：马彦江[1] 

机构地区：[1]河南中医学院第一附属医院,河南郑州450000

出　　处：《中医学报》2012年第4期455-456,共2页Acta Chinese Medicine

基　　金：国家自然科学基金(编号:30772794);河南中医学院博士科研基金(编号:BSJJ2010-22)

摘　　要：目的:优选调经颗粒的成型工艺。方法:以吸湿百分率、成型性、溶化性、流动性为指标优选辅料;以颗粒成型率为指标用L9(34)正交试验优选成型工艺,确定了调经颗粒的成型工艺。结果:筛选出的最佳成型工艺为药辅比(浸膏粉糊精糖粉=1069),用量20%的体积分数70%乙醇为润湿剂。结论:本研究为调经颗粒剂确定了成型工艺。Objective ：To optimize the molding process of Tiaojing granules. Methods：Moisture percentage, molding property, melting rate and mobility were used as the indicators to select accessories ; Molding process were optimized by L9 （ 34 ） orthogonal design based on the molding ratio of granules as the indicator and then the molding process of Tiaojing granule was determined. Results ：The best technology condition was that the ratio of drugs and supplementary ingredients （extract powder：powder：dextrin） equaled to 10：6：9, ethanol with a concentration of 70% and a volume of 20% was used as the wetting agent. Conclusion ： This study identifies the molding process for Tiaojing Granules.

关 键 词：调经颗粒 成型工艺 正交试验 

分 类 号：R283.6[医药卫生—中药学]