检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:曾桂元[1] 王存新[1] 李皋[2] 刘厚斌[2]
机构地区:[1]中国石化西南石油局钻井工程研究院 [2]西南石油大学
出 处:《钻采工艺》2012年第2期28-31,8,共4页Drilling & Production Technology
基 金:中国石化集团公司科学技术部科研项目"气体钻井方式下的水平井段轨迹控制技术研究"(编号:GP09012)的部分研究成果
摘 要:川西地区地层岩性自上而下分布十分复杂,不同深度泥页岩层段黏土矿物成分特性有明显差异,底部层段存在煤层,部分砂岩层段为高压高产气层。据实钻资料及地质分析,认为新场构造区块的中浅储层具有气体钻进水平井的条件。为此,在直井井壁稳定性评价方法的基础上,利用坐标转换,建立了气体钻水平井井壁稳定性评价模型,该模型考虑了井斜角、方位角的变化对气体钻井井壁坍塌密度的影响。现场实钻数据验证了该模型计算结果的正确性,表明该模型可以作为川西地区气体钻水平井作业的一种井壁稳定性评价方法。In western Sichuan region, distribution of lithology from above to below is very complicated, clay mineral in shale of different depth has a obvious difference, which manifests that the coal bed in the below formation and part of sandstone formation is high production and high pressure gas reservoir. According to the drilling data and geological analysis, middle and shallow reservoir of Xinchang structure were suited for horizontal gas drilling. This paper built a horizontal hole stability evaluation model with air drilling by using coordinate conversion, on the basis of vertical hole stability evaluation method. Additionally, the model considered the affect of deviation angle and azimuth angle's change on hole collapsing density in air drilling. Compared with field drilling data, the calculation results of the model were accurate, the model was suited for hole stability evaluation in horizontal air drilling in western Sichuan region.
关 键 词:气体钻水平井 井壁稳定 坍塌密度 井斜角 方位角
分 类 号:TE242.6[石油与天然气工程—油气井工程] TE243
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117