圆弧转子泵转子型线设计  

Design of Rotor Curve for Circular Rotor Pumps

作　　者：杨国来[1,2] 杜旭明[1] 郑海[1] 孙善兵[1] 张姗玲[1] 白桂香[1] 

机构地区：[1]兰州理工大学能源与动力工程学院,甘肃兰州730050 [2]兰州理工大学温州泵阀工程研究院,浙江温州325105

出　　处：《西华大学学报（自然科学版）》2012年第2期66-68,共3页Journal of Xihua University:Natural Science Edition

基　　金：甘肃省自然科学研究基金计划项目(1014RJZA023)

摘　　要：针对圆弧转子泵的圆弧转子,分析了转子型线的组成和参数,根据共轭原理推导出圆弧转子的理论型线方程,进而得到转子的实际型线方程,并通过型线的参数方程建立了三维实体模型,运用三维设计软件中的运动模拟功能,对三维模型进行运动模拟,模拟结果可知转子型线之间没有干涉,且间隙均匀。This article analyzed the composition and parameters of the circular rotor in a circular rotor pump.Based on conjugating principle,the theoreticl curve equation was deduced,furthermore,the curve of the rotor in practical use was generated.Three-dimensional solid model was established using the parametrical equation of the curve,and movement simulation was conducted with software Autodesk Revit.The results show that no interference is found between the curves of the rotor,and uniform gap exists.

关 键 词：转子泵 圆弧转子 型线方程 

分 类 号：TH326[机械工程—机械制造及自动化]