无刷双馈电机谐波铜耗与铁耗的分析与计算  

Calculation and analysis of harmonic copper losses and iron losses of brushless doubly-fed machine

作　　者：韩力[1] 王华[1] 马南平 刘航航[1] 

机构地区：[1]重庆大学输配电装备及系统安全与新技术国家重点实验室,重庆400044 [2]中国煤炭科工集团重庆研究院,重庆400039

出　　处：《电机与控制学报》2012年第3期22-29,共8页Electric Machines and Control

基　　金：输配电装备及系统安全与新技术国家重点实验室自主研究项目(2007DA10512709203)

摘　　要：针对无刷双馈电机谐波含量高、谐波损耗大的问题,提出考虑谐波磁场、谐波电流、集肤效应和旋转磁化影响的BDFM损耗计算模型。基于二维场路耦合时步有限元模型和谐波分析方法,分别建立两种转子铜耗计算模型和三种定转子铁耗计算模型,分析不同计算模型对转子铜耗和定转子铁耗的影响,得到定转子谐波铜耗和铁耗的变化规律。结果表明,转子铜耗模型2以及定转子铁耗模型3更精确;随着控制绕组电压的增加,定转子铜耗先减小后增加,定转子铁耗持续增加;随着负载转矩的增加,定转子铜耗和铁耗均随之增加。通过与一台相似异步电机铜耗和铁耗的电磁设计数据和实验数据的比较,验证了模型与计算结果的正确性。Aiming at abundant harmonics and large harmonic losses of brushless doubly-fed machine（BDFM）,the loss calculation models of BDFM were presented by considering the influence of harmonic magnetic field,harmonic currents,skin effect and rotating magnetization.Based on 2D time-stepping finite element model coupled with the circuit and the harmonic analysis method,two different models of rotor copper loss calculation and three different models of stator and rotor iron losses calculation were established,and the influence of different models on the rotor copper loss and the stator and rotor iron losses were analyzed.The variation tendency of BDFM harmonic copper and iron losses were then obtained.The results show that the model 2 of rotor copper loss and the model 3 of stator and rotor iron losses are more accurate.With the increase of control winding voltage of BDFM,the stator and rotor copper losses decrease first and then increase,the stator and rotor iron losses increase constantly.With the increase of BDFM load torque,the copper and iron losses both on stator and rotor increase continually.By comparison of the calculated results of copper and iron losses with the electromagnetic design data and the test data of a similar asynchronous machine,the correctness of the presented models and the calculated results are verified.

关 键 词：无刷双馈电机 电气损耗 谐波分析 有限元法 

分 类 号：TM302[电气工程—电机] TM154.1