水力喷砂压裂过程喷嘴冲刷腐蚀数值计算  

Numerical Calculation of Nozzle Erosion-Corrosion in the Course of Hydraulic Fracturing

作　　者：吕露[1,2] 欧阳传湘[1] 张伟[3] 

机构地区：[1]长江大学油气钻采工程湖北省重点实验室,荆州434023 [2]长江大学石油工程学院,荆州434023 [3]大港油田采油一厂作业二区,天津300280

出　　处：《腐蚀与防护》2012年第4期300-303,共4页Corrosion & Protection

摘　　要：喷嘴是水力喷砂压裂技术中最重要的部位,在施工过程中容易发生冲刷腐蚀,喷嘴的使用寿命因此缩短。运用计算流体力学的方法,建立了喷嘴冲刷腐蚀的数学模型,在介质腐蚀性一致的条件下,研究入口压力、含砂量、颗粒大小和密度、液相粘度对喷嘴壁受到的剪切应力大小的影响。结果显示,喷嘴冲刷腐蚀最严重的部位是入口处,入口压力和含砂量对喷嘴壁剪切应力的大小影响最大。Nozzle is the most important part of hydraulic fracturing. In the course of construction, nozzle is prone to be damaged by erosion-corrosion and thus its service life becomes shorter. A mathematical model of nozzle＇s erosioncorrosion was built by computational fluid dynamics method to study how the inlet pressure, sand content, particle size and density and liquid viscosity influence the shear stress of nozzle wall under the condition of constant corrosivity of the media. The results show that the erosion-corrosion of inlet is the most serious, the inlet pressure and sand content have great impact on the wail shear stress of nozzle wall.

关 键 词：水力喷砂压裂 喷嘴 剪切应力 冲刷腐蚀 

分 类 号：TG172.8[金属学及工艺—金属表面处理]