电感耦合连接器的均衡  

Equalization of inductively coupled connector

作　　者：曲咏哲[1] 李玉山[1] 闫旭[1] 丁同浩[1] 蒋冬初[1,2] 

机构地区：[1]西安电子科技大学电路CAD研究所,陕西西安710071 [2]湖南城市学院通信与电子工程学院,湖南益阳413000

出　　处：《西安电子科技大学学报》2012年第2期192-199,共8页Journal of Xidian University

基　　金：国家自然科学基金资助项目(60871072;60672027);湖南省科技厅科技计划资助项目(2010FJ6015);湖南省自然科学基金资助项目(10JJ6091)

摘　　要：电感耦合连接器可以用于板级互连的高速数字信号传输.当信号的传输速率增加或使用较大的电感值时,接收端脉冲将遭受过多的符号间干扰,不能有效地恢复信号.针对这个问题,通过分析接收端脉冲产生符号间干扰的原因,提出采用ALTERA驱动端均衡的方案,并给出均衡比例的计算方法.通过选取合适的均衡比例,增加驱动端信号的高频成分,减少低频成分,来提高接收端脉冲的幅度,降低脉冲的符号间干扰,这时在接收端使用一个简单的低功率触发电路就可以很好地恢复信号.仿真结果显示,采用驱动端均衡方案,能够有效地消除符号间干扰,使电感值的选择和信号传输速率相互独立,因此电感值较大的连接器可以传输高速数字信号.The inductively coupled connector can be used for high-speed digital signal transmission of board-level interconnect.With the increasing signal transmission rate or transformer inductance,the receiver-side of the inductively coupled connector will suffer excessive inter-symbol interference,and can not effectively recover the signal.To solve this problem,the ALTERA driver-side equalization scheme is proposed by analysing the reasons of inter-symbol interference and the equalization ratio calculation method of this scheme is also given.The equalization scheme is implemented through selection of an appropriate equalization ratio to increase high frequency components of the signal and reduce the low frequency components of the signal at the driver-side to reduce the inter-symbol interference and improve pulse magnitude,and the signal can be recovered with a simple low power trigger circuit.Simulation results show that using the driver-side equalization scheme can effectively eliminate inter-symbol interference,and that the choice of inductance and the signal transmission data rate are independent of each other,so the larger inductance of transformer can transmit high-speed digital signals.

关 键 词：电感耦合连接器 反相不归零码 均衡 符号间干扰 

分 类 号：TP811.3[自动化与计算机技术—检测技术与自动化装置]