检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:舒畅[1] 彭云峰[1] 王大为[1] 冯长江[2]
机构地区:[1]武汉军械士官学校光电仪器与指挥控制系,湖北武汉430075 [2]军械工程学院电气工程系,河北石家庄050003
出 处:《军械工程学院学报》2012年第1期41-43,共3页Journal of Ordnance Engineering College
摘 要:为了提高波分复用无源光网络信道的传输能力,提出了自适应调制光正交频分复用的多信道传输方法.首先,在单模光纤连接上采用直接调制激光器和直接检测技术,给出了传输系统的模型;其次,给出了波分复用信道比特位加载算法;最后,用实例分析了40(或80)km直接调制与检测单模光纤连接系统及传统单一调制系统的传输性能.结果表明:自适应调制信号传输能力得到提高,同时最佳动态光发射功率范围和削峰比范围分别提高5dB和3dB.In order to improve the channel's transmission capacity of WDM-PON,this paper presents a multi-channel transmission method of AMOOFDM. First, a transmission system model is provided using directly modulated laser and direct detection (IMDD) in single-mode fiber (SMF) links. Then a bit's adding algorithm of wavelength-division-multiplexed (WDM) is set up. Finally, the transmission capacity of DML-based SMF links is compared to the conventional identical modulation for a 40(or 80) km through the application example. The result shows that the transmission capacity Of adaptive modulation signal is promoted, and the optimum dynamic optical launch power range and clipping ratio range are extended 5 dB and 3 dB respectively.
关 键 词:自适应调制光正交频分复用 波分复用无源光网 多信道传输 单模光纤
分 类 号:TN915.62[电子电信—通信与信息系统]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.30