新型减速齿轮塑性成形工艺研究  

Study on Plastic Forming technology of Speed Reduction Gears

作　　者：于金伟[1] 

机构地区：[1]潍坊学院机电工程学院,山东潍坊261061

出　　处：《机械传动》2012年第4期94-95,99,共3页Journal of Mechanical Transmission

基　　金：山东省星火计划项目(2010XH0630);山东省火炬计划项目(2010SH040096);山东省国际科技合作计划项目(201013)

摘　　要：针对大模数拖拉机减速齿轮冷挤压时存在变形抗力大、齿腔充填困难、模具寿命低等技术难题,提出了在凹模齿腔深处设置分流型腔法,并结合浮动凹模技术,制订了挤压新工艺,试验结果显示,该工艺不仅能很好地提高充填性能,而且能降低载荷50%,提高了模具寿命。In the extrusion process for tractor speed reduction gear with large module,there are some technology difficulty problems,such as large deformation resistance,filling toothed cavity difficultly and low die life.A method of setting the dividing flow cavity in toothed cavity of die is put forward,and combining with floating die technology,a new extrusion technology is worked out.The experimentation results show： by the technology,filling performance is improved,a 50% reduction in extrusion force is realized,and the die life is increased.

关 键 词：减速齿轮 成形工艺 模具设计 

分 类 号：TG376.3[金属学及工艺—金属压力加工] TG61