检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:罗永峰[1] 李海锋[1,2] 李德章[3] 丁大益[4]
机构地区:[1]同济大学建筑工程系,上海200092 [2]华侨大学土木工程学院,福建厦门361021 [3]合肥市重点工程建设管理局,安徽合肥230001 [4]五洲工程设计研究院,北京100053
出 处:《同济大学学报(自然科学版)》2012年第3期344-352,共9页Journal of Tongji University:Natural Science
基 金:安徽省重点建设工程(20100527)
摘 要:通过4组16根箱形钢柱在偏心常轴压、柱顶反复水平荷载作用下的拟静力试验,研究轴压比、腹板宽厚比、柱顶弯矩等因素对箱形柱滞回性能的影响.试验表明,当柱顶轴力在腹板平面外的偏心小于b/8(b为翼缘板宽度)时,试件壁板屈曲变形为一个半波,腹板外凸,翼缘板内凹,变形基本对称.试件的塑性变形主要集中在柱根部区域,最大塑性变形一般出现在距固定端0.4~0.5h(h为腹板宽度)处.腹板宽厚比是影响构件抗震性能的主要因素,宽厚比越大,滞回曲线越不饱满,骨架曲线下降越陡,承载力及刚度退化越严重;轴压比的影响次之;柱顶弯矩的影响较小.根据试验结果,提出构件适用于四类抗震等级的定量判定标准及大跨度钢结构中箱形钢柱腹板宽厚比的设计建议.Pseudo-static experiments on seismic behavior of 16 eccentrically constant-compressed steel box columns under cyclic lateral loading are conducted.The effects of axial compression ratio,width-to-thickness ratio of web plate and bending moment on the seismic behavior of steel box columns are investigated.The experimental results show that the buckling mode of box web plates is influenced by the loading eccentricity of axial compression outside the web plane.If the eccentricity is less than b/8(b is the flange width),the buckling mode of the box web plates is deformed as a half sine-wave,in which the web plates deform outwards from the box and the flanges inwards,and the buckling deformation is almost symmetrical.The plastic deformation of the columns under cyclic load occurs mainly in the fixed end of specimen,and the greatest plastic deformation is generally found at 0.4h or 0.5h away from the fixed end,where h is the width of the web plate.It is also found from the experiments that the width-to-thickness ratio of web plate has the most significant effect on the seismic behavior of the steel box columns.The larger the width-to-thickness ratio is,the less plumpy the hysteresis curve becomes,the faster the skeleton curve declines,and the more severely the load-bearing capacity and stiffness of the column degenerates.The axial compression ratio has more significant effect on the seismic behavior of columns,while the effect of bending moment at the loading joint of the column is little and negligible.Based on the experimental results,a practical criterion to evaluate the applicable seismic grade of steel members and some design suggestions of width-to-thickness ratio of box-section steel column in large span structures are proposed.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38