含油乳化废水处理技术研究  

Technological study on the treatment of oil-bearing and emulsifying wastewater

作　　者：郭玉华 吴小令 郑建涛 陈志传 

机构地区：[1]深圳市工业废物处理站,广东深圳518049

出　　处：《工业水处理》2000年第5期28-30,共3页Industrial Water Treatment

摘　　要：采用氧化、隔油—絮凝—吸附法对金属制品厂含油乳化废水进行处理 ,结果表明 :在适宜的处理条件下 ,该法可有效地去除水中COD和油 ,去除率分别为 98 6%和 97 9% ,Ni2 +离子去除率达 1 0 0 %。The experimental treatment of oil bearing and emulsifying wastewater from metal producing plants is conducted using oxidation, separation of oil, flocculation and adsorption processes. The experimental results shows that, under the appropriate conditions, the total removal efficiencies of the COD and oil are 98.6% and 97.9% respectively. The nickel could not be detected.

关 键 词：含油乳化水 废水处理 物理化学法 金属制品厂 

分 类 号：X758.03[环境科学与工程—环境工程]