GDX2硬盒包装机组铝箔纸压花烟徽微调装置的改进  

Improvement of Foil Logo Embossing Fine Tuning Device in GDX2 Packer

作　　者：顾丕雄[1] 吴志伟[1] 徐伟民[1] 郭红旗[1] 

机构地区：[1]浙江中烟工业有限责任公司宁波卷烟厂,浙江省宁波市曙光路109号315040

出　　处：《烟草科技》2012年第4期23-24,32,共3页Tobacco Science & Technology

摘　　要：GDX2硬盒包装机组原铝箔纸压花烟徽微调装置操作空间小,调节烟徽位置时需停机操作且调整量难以掌握,为此对GDX2铝箔纸压花烟徽微调装置进行了改进。以双辊调节方式代替单辊偏心调节,设计了丝杠、滑块相结合的调节结构。改进后的双辊中心螺旋微调装置消除了偏心微调对毛刷的影响,可调量由原来的32 mm提高到55 mm,调整时间由15～30 min缩短为3 min,调整过程方便快捷,实现了烟徽位置的在线调整,提高了设备有效作业率。The limited operating space of foil logo embossing fine tuning device in GDX2 packer makes it hard to accurately set logo＇s position,and the machine has to be stopped while adjusting.Therefore,the device was improved by replacing single eccentric roller with two rollers and incorporating screw rod and slide mechanism.After improvement,the influence of eccentrical roller on brush was eliminated,the maximal adjustable volume increased from 32 to 55 mm,and the adjustment duration decreased from 15-30 to 3 minutes.The online adjustment was convenient and fast,and the machine efficiency was increased.

关 键 词：GDX2硬盒包装机组 铝箔纸 烟徽 微调装置 

分 类 号：TS434[农业科学—烟草工业]