双摆线转子的参数化设计  

Parametric Design of Dual-cycloid Rotor

作　　者：李炜[1] 吴伟蔚[1] 蔡丽君[1] 

机构地区：[1]上海工程技术大学汽车工程学院,上海201620

出　　处：《上海工程技术大学学报》2012年第1期58-61,共4页Journal of Shanghai University of Engineering Science

基　　金：上海市教委科研创新资助项目(10YZ174)

摘　　要：根据双摆线转子齿廓生成方式推导其齿廓方程,再由啮合原理推导与之共轭的齿廓.使用UG/Open GRIP模块,在UG环境下开发双摆线转子的自动生成程序.通过离散化齿廓的数学表达式,建立相应的曲线,并且在接口界面中控制和改变参数值,得到用户需要的转子模型.According to the formation method of cycloid,a rotor profile equation was deduced.Based on the theory of gearing,its conjugate profile can be obtained.UG/Open GRIP was used to generate dual-cycloid rotor automatically.Corresponding curves were built by mathematical expression having discrete feature.To get the desired rotor model,the parameters can be controlled and changed in the control interface.

关 键 词：摆线齿轮 二次开发 参数化设计 

分 类 号：TH137.51[机械工程—机械制造及自动化]