基于CC430的智能型线路故障指示器的研制  

Development of the Intelligent Fault Indicator Based On CC430

作　　者：李士克[1] 邱道尹[1] 李耀[1] 金博[1] 

机构地区：[1]华北水利水电学院电力学院,郑州450001

出　　处：《自动化与仪表》2012年第4期18-21,共4页Automation & Instrumentation

摘　　要：介绍了信号注入法在单相接地故障选线和定位中的应用,在此理论基础上研制了基于CC430的智能型线路故障指示器,并介绍了其软硬件实现方案。该指示器用于10kV配电线路,不仅具有短路、接地故障翻牌闪光指示功能,还能通过指示器中的数字化无线通信模块把信息传到监控中心,方便工作人员迅速确定故障点位置。整个系统由CPU模块、电源模块、信号调理模块、翻牌驱动模块、无线通信模块等组成。目前,所研制的故障指示器产品已经通过实验室检测,并成功应用于三门峡豫灵线等输电线路,取得了很好的效果。Introduction the application of signal injection method in the single-phase ground fault detection and location,development the intelligent fault indicator based on CC430 in this theory,describes its hardware and software implementationso The indicator for the 10kV distribution lines flashes when the line short-circuit or grounding,it can also send messages to the monitoring center by the wireless communication module,then the staff can determine the fault position quickly~ The system consists of CPU module.Power module.signal conditioning module.turn over the card module.wireless communication module At present,the fault indicator have been developed though the laboratory tests,which succcessfnlly applied to the YULING line in SANMENXIA and achieve very good results.

关 键 词：CC430 无线单片机 故障指示 单相接地 

分 类 号：TP23[自动化与计算机技术—检测技术与自动化装置]