第二心音主动脉瓣分量和肺动脉瓣分量的提取方法  

Extraction of Aortic and Pulmonary Components from Second Heart Sound

作　　者：高佼[1] 唐洪[1] 邱天爽[1] 于勤[2] 

机构地区：[1]大连理工大学生物医学工程系,大连116024 [2]大连大学附属中山医院,大连116001

出　　处：《中国生物医学工程学报》2012年第2期222-230,共9页Chinese Journal of Biomedical Engineering

基　　金：国家自然科学基金(81000643)

摘　　要：提出了一种基于模拟退火算法的第二心音(S2)主动脉瓣分量(A分量)和肺动脉瓣分量(P分量)的提取方法。假设A分量和P分量服从包络调制的chirp模型,并用18个参数来表达。在最小均方误差准则下,通过模拟退火算法为A分量和P分量估计出最优参数,从而重构出A分量和P分量。仿真结果表明:在无噪声条件下,重构A分量和P分量的均方误差分别在1%和8%以内;在-15 dB的加性高斯白噪声条件下,重构A分量和P分量的均方误差分别在1.5%和10%以内。进一步提取了10位志愿者S2信号的A分量和P分量,并用两位志愿者的颈动脉重搏切迹验证了重构的A分量和P分量的分界时刻,证明了方法的有效性。An extraction method based on simulated annealing（SA） algorithm was proposed to estimate the aortic valve component（A component） and pulmonary valve component（P component） from a second heart sound（S2）.It was assumed that both A and P components are subject to envelope modulated chirp model.Each component was characterized by 9 parameters.A S2 signal is thus represented by 18 parameters in total.Under mean squared error（MSE） criterion,the optimal parameters of A component and P component were estimated by using SA algorithm.The A and P components were then reconstructed.Simulation results showed that,the MSEs of reconstructed A and P components are less than 1% and 8% for noise-free condition;the MSEs were less than 1.5% and 10% for-15 dB additive Gaussian white noise condition.In further applications,A and P components are extracted from S2 signals of 10 subjects.The end timing and start timing of reconstructed A and P components were further verified by the dicrotic notches for 2 subjects.

关 键 词：第二心音 模拟退火算法 主动脉瓣分量 肺动脉瓣分量 参数估计 

分 类 号：R318[医药卫生—生物医学工程]