燃煤电厂烟气中汞的采样与分析方法  

Sampling and Analysis Method of Mercury in Flue Gas of Coal-fired Power Plant

作　　者：管一明[1] 王宏亮[1] 许月阳[1] 薛建明[1] 王小明[1] 王铮[1] 

机构地区：[1]国电科学技术研究院(国电环境保护研究院),江苏南京210031

出　　处：《环境监控与预警》2012年第2期16-19,共4页Environmental Monitoring and Forewarning

基　　金：国家环保公益性行业科研专项(200909025);国电集团重点科技项目(HZ1015)

摘　　要：汞的测试技术包括采样和分析两部分,其中汞含量的分析方法已经相对比较成熟,限制测试技术发展的诸多问题主要来源于取样过程。根据不同的取样方式,将现有测试技术分为湿式采样分析法、干式采样分析法以及在线分析技术3种,重点介绍了3种方法的采样原理、系统构成、过程的影响因素以及适用范围。最后针对CVAAS、CVAFS、AES 3种汞含量测定技术在Hg CEMS测试系统中的应用进行了对比介绍。Mercury testing technology is consists of sampling and analysis, and the analysis method of mercury content has been relatively mature. Quite a lot of problems come from the sampling process, which limit the development of the mercury testing tech- nology. According to different sampling methods, the existing testing technology has been divided into wet sampling analysis, dry sampling method and on-line analysis technology. The sampling principle, system structure, process and range of application of the three methods are introduced. Finally, the application in Hg CEMS testing systems of three mercury content testing technologies of CVAAS, CVAFS, AES are introduced and compared.

关 键 词：燃煤电厂 汞 采集 分析 

分 类 号：X830.2[环境科学与工程—环境工程]