氟修饰的含Ni类水滑石在甲烷部分氧化制合成气中的应用研究  

Application of fluorine-modified Ni-Mg-Al hydrotalcite catalyst in the partial oxidation of methane to syngas

作　　者：张军[1,2] 王秀芝[1] 赵宁[1] 肖福魁[1] 魏伟[1] 孙予罕[1,2] 

机构地区：[1]中国科学院山西煤炭化学研究所煤转化国家重点实验室,山西太原030001 [2]中国科学院上海高等研究院低碳能源转化中心,上海201203

出　　处：《燃料化学学报》2012年第4期424-429,共6页Journal of Fuel Chemistry and Technology

摘　　要：通过共沉淀法合成了含Ni/Mg/Al的类水滑石,并利用水滑石的"重构性能"将F-引入到水滑石层间。焙烧该类水滑石后得到Ni/Mg/Al/O-F催化剂,采用XRD、SEM、CO2-TPD、H2-TPR、N2吸附-脱附等手段对其结构进行了表征。结果表明,焙烧后的催化剂为方镁石结构,并具有丰富的介孔,Ni/Mg/Al/O-F较之不含F-的复合氧化物Ni/Mg/AlO具有更小的比表面积、颗粒粒径和结晶度,但是碱密度明显增大,并且在甲烷部分氧化(POM)反应中表现出更高的活性和稳定性,反应120 h后,活性没有下降。这是因为F-的引入提高了催化剂碱性和活性组分Ni的分散,从而改善了催化剂的抗积炭和烧结能力。Fluorine-modified Ni-Mg-Al mixed oxides（Ni/Mg/Al/O-F） prepared from thermal decomposition of hydrotalcite-type（HT） precursor was characterized by XRD,SEM,CO2-TPD,H2-TPR,and N2 sorption and used as catalyst in partial oxidation of methane（POM） to syngas.The results indicated that Ni/Mg/Al/O-F catalyst after calcination takes the mesoporous structure of periclase.Compared with the non-modified Ni-Mg-Al mixed oxides（Ni/Mg/Al/O）,Ni/Mg/Al/O-F exhibits lower surface area,lower crystallinity and smaller particle size,but higher basicity of moderate and strong intensity.Ni/Mg/Al/O-F exhibits high activity and stability in POM;the activity at 1 053 K retains without deactivation even after 120 h on stream.The presence of the F-anions can enhance the dispersion of active nickel species and their resistance to coking,which may contribute to the high performance of Ni/Mg/Al/O-F catalyst.

关 键 词：类水滑石 POM 复合氧化物 F- 

分 类 号：TQ21[化学工程—有机化工]