基于ADAMS和ANSYS的梭式皮带布料机下回转支座的研究  

Simulation analysis of the bottom bearing support of shuttle belt conveyer based on ADAMS and ANSYS

作　　者：刘欢[1] 廖湘辉[1] 丁明[1] 陈文琛[1] 姜雨[1] 

机构地区：[1]三峡大学机械与材料学院,湖北宜昌443002

出　　处：《机械研究与应用》2012年第2期60-62,共3页Mechanical Research & Application

摘　　要：研究运用ADMAS和ANSYS联合分析方法对梭式皮带布料机下回转支座进行结构分析。首先利用ADAMS进行动力学分析,获得下支承座与回转支承连接点的动力学参数随时间变化的曲线。然后把ADAMS仿真获得的连接点处载荷信息作为下支承座有限元分析的边界条件,对结构件进行强度分析。分析结果验证了初始设计的可行性,确定了物理样机设计中的关键设计参数,为进一步的优化设计提供了依据。The research carries on the structural analysis of shuttle belt conveyer slewing bearing based on ADAMS and ANSYS.Firstly,the dynamic analysis by ADAMS is maken and achieves the time-varying curve of the dynamical parameters of the joint between the bearing support and slewing bearing.Secondly,take the load data received from ADAMS emulation as the boundary conditions of finite element analysis and make the intensity analysis.The analytical result verifies the feasibility of the initial design,and establishes the key parameter in the physical prototype,and gives support for further design optimization on the bridge inspection truck boom system.

关 键 词：梭式 皮带布料机 回转支座 ADAMS ANSYS 

分 类 号：TP391.9[自动化与计算机技术—计算机应用技术] TH222[自动化与计算机技术—计算机科学与技术]