Investigation of the Flow in the Impeller Side Clearances of a Centrifugal Pump with Volute Casing  

作　　者：Bjrn-Christian Will Friedrich-Karl Benra Hans-Josef Dohmen 

机构地区：[1]Institute of Energy and Environmental Engineering,Turbomachinery,University Duisburg-Essen

出　　处：《Journal of Thermal Science》2012年第3期197-208,共12页热科学学报（英文版）

摘　　要：The paper is concerned with the fluid flow in the impeller side clearances of a centrifugal pump with volute cas-ing.The flow conditions in these small axial gaps are of significant importance for a number of effects such as disk friction,leakage losses or hydraulic axial thrust to name but a few.In the investigated single stage pump,the flow pattern in the volute turns out to be asymmetric even at design flow rate.To gain a detailed insight into the flow structure,numerical simulations of the complete pump including the impeller side clearances are accom-plished.Additionally,the hydraulic head and the radial pressure distributions in the impeller side clearances are measured and compared with the numerical results.Two configurations of the impeller,either with or without balancing holes,are examined.Moreover,three different operating points,i.e.:design point,part load or overload conditions are considered.In addition,analytical calculations are accomplished to determine the pressure distri-butions in the impeller side clearances.If accurate boundary conditions are available,the 1D flow models used in this paper can provide reasonable results for the radial static pressure distribution in the impeller side clearances.Furthermore,a counter rotating wake region develops in the rear impeller side clearances in absence of balancing holes which severely affects the inflow and outflow conditions of the cavity in circumferential direction.

关 键 词：Cavity Rotor-Stator Cavities Side Chambers Centrifugal Pump 

分 类 号：TH311[机械工程—机械制造及自动化]