气相色谱-质谱法测定木制品中双三丁基氧化锡  

GC-MS Determination of Bis(tributyltin)oxide in Woodwork

作　　者：徐善浩[1] 林振兴[1] 邬蓓蕾[1] 袁丽凤[1] 孙君猛[1] 黄通人[1] 

机构地区：[1]宁波出入境检验检疫局,宁波315012

出　　处：《理化检验（化学分册）》2012年第4期412-414,共3页Physical Testing and Chemical Analysis(Part B:Chemical Analysis)

摘　　要：提出了气相色谱-质谱法测定木制品中双三丁基氧化锡(TBTO)含量的方法。样品经甲醇提取,所得提取液用四乙基硼化钠衍生化,产物用气相色谱-质谱法测定,外标法定量。双三丁基氧化锡的质量浓度在0.1～40 mg.L-1范围内与峰面积呈线性关系,方法的检出限(3S/N)为0.05mg.kg-1。在3个标准加入水平下进行了回收率和精密度试验,加标回收率在88.4%～90.4%之间,相对标准偏差(n=6)在2.0%～5.4%之间。CK3-MS method was applied to the determinations of bis（tributyltin）oxide （TBTO） in woodwork. The sample was extracted with methanol, the extract obtained was derived with NaB（Et）4. The product was used for GC-MS analysis. External standard calibration was adopted in the determinatioru Linear relationship between peak areas and mass concentrations of TBTO was obtained in the range of 0. 1-40 mg . L^-1. Detection limit （3S/ N） of the method was 0. 05 mg .kg^-1. Tests for recovery and precision were made by standard addition method at 3 different concentration levels, values of recovery and RSDfs （n= 6） found were in the ranges of 88. 4%-90.4% and 2. 0%-5.4%.

关 键 词：气相色谱-质谱法 双三丁基氧化锡 木制品 

分 类 号：O657.63[理学—分析化学]