检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:文丽华[1] 王金玲[1] 任忠先[1] 吉泽升[1] 董碧娟[2]
机构地区:[1]黑龙江工程学院机电工程学院,哈尔滨150050 [2]哈尔滨理工大学材料科学与工程学院,哈尔滨150040
出 处:《机械工程师》2012年第5期15-16,共2页Mechanical Engineer
摘 要:利用固相合成的方法合成Mg-20.72%Ce中间合金和ZM6耐热镁合金混合屑。结果表明:Mg-Ce中间合金屑在ZM6镁合金中分布不均匀,处于加入时的形状。合金组织主要为拉长的变形纤维组织和亚晶组织。Ce含量越高,在ZM6镁合金中分布的Mg-Ce中间合金越多;所有固相合成含Ce的ZM6镁合金的抗拉强度和延伸率均低于不含Ce的ZM6镁合金的抗拉强度和延伸率。相比较而言,含3.5%Ce的ZM6镁合金综合性能好一些。试样的断裂方式为脆性断裂。ZM6 heat-resistant magnesium alloy 〈:hips and Mg-Y alloy chips were prepared by solid state recyeling. The resuhs indieale: Mg-Ce alloy chips unevenly distribute in ZM6 magnesium alloy. Microstructure of the alloy is elongated grains and scrappy sub-grains. With the increase of Ce content:, more Mg-Y alloy chips exist in ZM6 magnesium alloy. Tensile strength and elongation to failure of the ZM6 alloy containing Ce are lower than that of the ZM6 alloy not containing Ce. Mechanical properties of the ZM6 alloy containing 3.5%Ce are better. Fraetural mode of the sample is brittle fracture.
关 键 词:ZM6镁合金 Mg—Ce中间合金 固相合成 显微组织 力学性能
分 类 号:TG146.22[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38