三组分纤维混纺提花条格织物的生产体会  

Experience of Producing Three Components Fiber Blended Jacquard Stripe Fabric

作　　者：党美娟[1] 乔莉英 代瑞 

机构地区：[1]陕西省纺织科学研究所 [2]陕西五环(集团)股份有限公司

出　　处：《棉纺织技术》2012年第5期58-60,共3页Cotton Textile Technology

摘　　要：探讨精梳棉Tencel圣麻混纺提花条格织物的生产技术要点。通过对该织物风格特征及生产难点进行分析,认为,浆纱时采用"小张力、低伸长、求被覆、贴毛羽"的工艺路线,合理设定各区张力,保证双织轴经纱张力一致;穿综时合理配置工艺,加强操作人员培训;织造时采用"中后梁、小开口"的工艺原则,保证梭口清晰,尽量减少织机张力,最终使织制该织物时的织机效率由原来的70%提高到80%,入库一等品率达到99%。Technology key points of producing combed cotton Tencel shengma blended jacquard stripe fabric were discussed. Fabric styles and difficulities in production were analyzed. It is considered that processing of less tension and elongation,more coating and less hairiness should be adopted, tension in each area should be set rationally to ensure same tension in two-beam warping. In heald,processing should be set properly,operation of personel training should be strengthened. In weaving, processing of middle back beam and smaller shed should be selected to ensure shed clear and reduce loom tension. Finally loo efficiency can be improved from 70% to 80% ,storage first-class product rate can reach 99%.

关 键 词：精梳棉 TENCEL纤维 圣麻纤维 提花织物 条格织物 浆纱 织机效率 

分 类 号：TS106.55[轻工技术与工程—纺织工程]