检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:朱明[1] 石玗[1,2] 黄健康[1,2] 樊丁[1,2]
机构地区:[1]兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室,兰州730050 [2]兰州理工大学有色金属合金及加工教育部重点实验室,兰州730050
出 处:《机械工程学报》2012年第10期45-49,共5页Journal of Mechanical Engineering
基 金:国家自然科学基金(51165023);兰州理工大学优秀青年教师培养计划(Q200901);陇原青年创新人才扶持计划资助项目
摘 要:采用等效电流路径的方法建立双丝旁路耦合电弧高效熔化极气体保护焊耦合电弧的动态数学模型,模拟表征焊接过程稳定性的电流、净干伸长信号的变化,得到与实际焊接过程相似的模拟结果。在此基础上,针对焊接过程中耦合电弧形态的剧烈变化会影响焊接过程稳定性与焊接质量的问题,提出通过调节旁路弧长控制耦合电弧稳定性的方案,并利用Matlab/Simulink软件和xPC-target快速原型控制平台,对控制方案进行模拟、分析、预测与试验。结果表明:所建立的数学动态模型能很好地反映双丝旁路耦合电弧高效GMAW焊接过程;模拟分析旁路弧长控制方案可以有效地解决焊接过程稳定性的问题;控制试验实现了焊接过程的稳定控制并获得了成形良好的焊缝形貌,验证了模拟阶段的分析与预测。A mathematical model for consumable double-electrode gas metal arc welding(DE-GMAW) is established by using the equivalent path method and then the simulations about welding process are carried out which.During the simulation,aiming to the requirement of stably welding process,a control plan is proposed to control the stability of decoupling arc shape with the bypass wire extension as controlled object.Based on Matlab/Simulink and xPC-real-time target environment,the simulation,analysis,prediction and experiment about this control scheme are accomplished.The results show that mathematical model can reflect the process of consumable DE-GMAW well;Simulation and analysis can confirm the control scheme;the experiment can prove simulation results and obtain good weld formation on the basis of stable welding process.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15