基于有限元的大型模锻压力机钢丝缠绕动梁预应力测试  

Pre-stress Test for Steel Wire Wound Moving Beam of Heavy Forging Press Based on Finite Element Method

作　　者：何文斌[1,2] 曾攀[1] 张磊[1] 林峰[1] 颜永年[1] 赵锦 

机构地区：[1]清华大学机械工程系,北京100084 [2]郑州轻工业学院机电学院,郑州450002 [3]中国二十二冶集团机电公司,唐山063030

出　　处：《机械工程学报》2012年第10期66-74,共9页Journal of Mechanical Engineering

基　　金：国家科技支撑计划资助项目(2007BAF05B02)

摘　　要：预应力检测对重型压机钢丝缠绕工艺来说至关重要。钢丝缠绕压机动梁结构复杂,缠绕时表面应力场分布无明显规律,测试难度大,目前动梁缠绕工艺的应力测试尚属空白,给工艺质量评价及工艺控制带来不便。应用有限元法对400 MN航空模锻压机动梁缠绕进行模拟,研究动梁缠绕时端面的应力场分布特征,确定动梁端面存在环形的径向、周向单向应力区,据此制定应变测量贴片方案,解决了重型压机动梁缠绕过程中预应力测试的难题。有限元计算结果与试验结果基本吻合,确保动梁缠绕工艺质量达到设计要求,也证实了这种基于有限元的应力测试方法的可行性。该方法对于其他复杂工程结构的应力测试具有借鉴意义。The pre-stress test is critical for steel wire wound process of heavy forging press.The structure of the moving beam of 400 MN aviation forging press is so complex that there is no distinct characteristics on the distribution of surface stress field,for which the stress test is a difficult problem.The absence of stress test brings much inconvenience for quality evaluation and control of the winding process.Therefore,in order to study the winding process of moving beam in detail,the finite element method（FEM） is used to study the characteristics of the stress field,and determine the radial and circumferential uniaxial stress regions on the moving beam surface.The strain gage test is also designed based on the FEM results to solve the pre-stress test problem.The FEM results agree well with the experimental results,it indicates that the quality of the winding process could satisfy the design requirement,and the test method based on FEM is feasible.The method could be extended to the stress test of other complex engineering structures.

关 键 词：有限元法 钢丝缠绕 坎合 模锻压力机 应力测试 

分 类 号：TG315[金属学及工艺—金属压力加工]