棉涤竹节高密交织物的生产实践  

Production practices of cotton/polyester slub high-density mixture fabric

作　　者：宋孝浜[1] 唐维强[2] 

机构地区：[1]盐城工学院,江苏盐城224054 [2]江苏双山集团股份有限公司,江苏盐城224000

出　　处：《上海纺织科技》2012年第5期47-49,共3页Shanghai Textile Science & Technology

摘　　要：探讨了棉涤竹节高密交织物生产技术要点:浆纱工序对两种经纱采用酸性红染色上浆,以杜绝后道工序因穿错产生疵点;穿综时将强力低、容易松弛的经纱放在前列,采用AB综丝,减少纱线摩擦,降低断头;织造工序根据不同种类的纱线性能特点,采用不同的引纬工艺,以减少纬向停台与疵点;通过对各道工序工艺的优化,使织造效率从初期的60%提高至85%。Main technique points in producing cotton/polyester slub light density mixture fabric were investigated in this paper： in sizing procedure acid red dye was used to dye two kinds of warp ends to eliminate puncture-wrong defects in the downstream procedure. The warp ends of low strength and easing to relax were made on the front in the healding procedure and AB headles were used to reduce yarn friction and breakage. Different weft insertion processing was followed based on different performances of different types of yarns in the weaving procedure to reduce weft stops and defects. The optimized each process makes the efficiency of product varity from the initial 60% to 85%.

关 键 词：交织织物 棉 涤纶 竹节花式纱 织造 工艺 措施 

分 类 号：TS105.1[轻工技术与工程—纺织工程]