孔型设计对棒材连轧稳定性的影响  

The Influences of Roll Design on Rods and Bars Tandem Rolling

作　　者：潘露[1,2] 帅美荣[1] 黄庆学[1] 

机构地区：[1]太原科技大学材料科学与工程学院,太原030024 [2]安徽机电职业技术学院机械工程系,安徽芜湖241002

出　　处：《太原科技大学学报》2012年第2期123-127,共5页Journal of Taiyuan University of Science and Technology

基　　金：山西省青年科学研究基金(2010021024-1);山西省研究生科技创新项目(20113114)

摘　　要：针对目前钛合金棒材生产现状,提出了一种新的棒材连轧孔型系统,即正三角平孔型+二辊圆孔型+正三角平孔型+二辊圆孔型系统。分析了失稳轧件在孔型中的受力情况,以及导卫装置对连轧稳定性的影响,获得了改善连轧过程轧件失稳的主要因素,优化了轧机孔型系统。用弹塑性有限元方法模拟了棒材的四道次连轧过程,并与其它孔型系统进行比较。结果表明,提出的孔型系统综合了二辊孔型与三辊孔型的特点,连轧稳定性相对较好,从而解决了Y型轧机棒材连轧过程稳定性问题。In view of the disadvantages of tandem rolling of titanium alloy rods and bars,a new rods and bars tandem rolling pass system was proposed,which was composed of upward-pointing triangle flat pass ＋ two-roll circle pass ＋ downward-pointing triangle flat pass ＋ two-roll circle pass.The key factors were acquired according to the force analysis of instable workpiece in the pass and the guiding device.The pass system is optimized.The rods and bars tandem rolling process was analyzed by three-dimensional FEM,and the stability was compared.The result indicates that the stability of proposed pass system was better,and the rolling stability can be solved in three-roll rolling process.

关 键 词：Y型轧机 孔型设计 棒材 有限元 稳定性 

分 类 号：TG335.19[金属学及工艺—金属压力加工]